ISO 42001 Audit Process and Timeline
By Akshaya, Founder and editor · Updated 26 Oct 2026
Schellman, A-LIGN and NQA each describe an ISO 42001 certification audit in two stages: Stage 1 reviews documentation and design, and Stage 2 tests whether the system works in practice. They say the certificate lasts three years, with annual surveillance audits in between.
Is this for you?
Read this if:
- You are about to book an ISO 42001 certification audit and want to know what happens.
- You want the typical audit days and the gap between stages.
- You want to know what happens after you are certified.
You can probably skip this if:
- You want fees. Go to ISO 42001 certification cost.
- You want the list of requirements. Go to ISO 42001 requirements checklist.
You are here
Steps 6, 7 and 8 of the first-audit path. 0 Do I need this > 1 Which framework > 2 Scope and Type 1 vs 2 > 3 Readiness > 4 Choose an auditor > 5 Tools and help (optional) > 6 Observation period > 7 The audit > 8 Report and renewal.
Previous step: 4 Choose an auditor, How to choose an ISO 42001 certification body. Next step: step 8 is covered at the end of this guide, in “What happens after certification?”. There is no separate guide yet.
At a glance
| Fact | Source label |
|---|---|
| Stage 1 typically lasts 1 to 2 days. Stage 2 typically takes 3 to 9 or more days | Firm states (Schellman) |
| The gap between Stage 1 and Stage 2 is usually 4 to 12 weeks and should not exceed six months | Firm states (Schellman) |
| NQA says the system must have been fully operational for at least three months before its initial audit | Firm states (NQA) |
| Surveillance audits take about a third of the initial audit time | Firm states (Schellman) |
| Vanta estimates 6 to 12 months to certify with manual work, and 3 to 6 months with automation tools | Firm states (Vanta, estimate) |
What are the steps?
Schellman describes the path as an optional readiness or gap assessment, a Stage 1 audit, a Stage 2 audit, a certification decision, annual surveillance audits and recertification. A-LIGN describes a two-stage audit, with a readiness assessment first for most organizations. DEKRA lists seven steps: documentation information, on-site certification in two stages, an audit report, the certificate and seal, a first and second surveillance audit, and recertification three years after the first certificate. The firms describe the same path in different groupings.
What happens in Stage 1?
Stage 1 is a review of your documents and design. Schellman says it covers scope, policies, risk and impact assessment methods and the Statement of Applicability, and typically lasts 1 to 2 days.
What happens in Stage 2?
Stage 2 tests whether the AI management system is working. Schellman says it evaluates how the system operates, including risk management, Annex A controls and performance evaluation, and typically takes 3 to 9 or more days. A certification decision follows the formal report. NQA says its system must have been fully operational for at least three months before the initial audit, with a management review and a full cycle of internal audits done.
How long is the gap between stages?
Schellman says the gap before Stage 2 is usually 4 to 12 weeks and should not exceed six months. After six months Stage 1 must be repeated.
How long does the whole project take?
The certification bodies we read give stage-by-stage durations, not one end-to-end timeline. Vanta estimates 6 to 12 months for manual-heavy processes and 3 to 6 months with automation tools such as its own. Vanta says these are estimates and come from anecdotal data, so treat them as a rough guide. The time depends on how ready you are.
What happens with nonconformities?
Schellman says a major nonconformity affects whether the management system can achieve its intended results, and a minor one does not. It states that a corrective action plan is due 14 days after the review closes and evidence of correction 30 days after, for both kinds. It says major findings need evidence of remediation within 60 days, and minor findings by the next review. Those are one firm’s deadlines, and your body may set different ones. Schellman also says a certificate cannot be issued until the plan and correction are provided. Ask your body for its deadlines in writing.
What happens after certification?
- Schellman, A-LIGN and NQA say the certificate is valid for three years.
- Annual surveillance audits take place in between. Schellman says each takes about a third of the initial audit time, typically 2 to 5 or more days.
- A recertification audit follows after three years, according to NQA and DEKRA.
Can ISO 42001 and ISO 27001 be audited together?
A-LIGN states that it can assess both at the same time and share evidence across them. DEKRA says the standard can be integrated with ISO 27001. Other bodies may differ, so ask for a combined quote.
What questions should you ask your certification body?
- How many audit days do you set for our size and scope? Each body sets its own days.
- How do you handle nonconformities, and how much time do we have to fix them?
- How long must our system have been running before Stage 1 and Stage 2?
- Can you quote a combined ISO 42001 and ISO 27001 audit?
Where you will see different numbers
How long does certification take overall? Vanta estimates 6 to 12 months with manual work and 3 to 6 months with automation, and says these are estimates. What changes it: how ready your documents and controls are, scope, and how fast you close findings.
How many audit days? Schellman says 1 to 2 for Stage 1 and 3 to 9 or more for Stage 2. What changes it: company size, number of AI systems in scope and number of locations. Each body sets its own days.
What this guide does not cover
This guide does not cover fees, or the ISO text on audit duration. The ISO pages were not readable, so audit days and deadlines come from firm pages and are labelled “Firm states”. It does not say how any one body will treat your audit.
Your next step
Ask your chosen certification body for its audit day count for your scope, and how long your system must have been operating before the initial audit.
Our view: Let the system run for a few months before you book Stage 1, so there is evidence for the auditor to test. NQA’s three-month requirement points the same way.
Shortlist ISO certification bodies
Browse the ISO 42001 certification bodies directory. Filter by region, size and framework.
How did we check this guide?
We read the firm pages named here, including Schellman, ISO 42001 certification process, DEKRA, ISO 42001 and NQA, ISO 42001. ISO’s own pages were not readable, so these statements are labelled “Firm states”. Each check is dated in the sources list. Our methodology explains how we label facts and why we show dates. We don’t do audits, and nothing here is legal or audit advice.
Tell us what you need and get 3 to 5 quotes from firms matched on fit. Free for buyers.
Get quotesQuestions
Is a readiness assessment required before certification?
Schellman says it is not required for certification. It describes the assessment as a way to find gaps before the formal audit.
What if we fail Stage 1 or 2?
Schellman says a certification body cannot issue the certificate until your corrective action plan and correction evidence are provided for each finding. Ask your body how it handles nonconformities and the time you have to fix them.
Who runs the audit?
A certification body. The Compliance Index does not do audits.
Does this guide cover fees?
No. See [ISO 42001 certification cost](/iso-42001-certification-cost/).
Related guides
- ISO 42001 Requirements Checklist
- Matching directory list: ISO 42001 certification bodies
Sources
- Schellman, ISO 42001 certification process (Firm states, published 2025-06-16, updated 2026-06-16), checked 20 Oct 2026
- DEKRA, ISO 42001 (Firm states, undated), checked 20 Oct 2026
- NQA, ISO 42001 (Firm states, undated), checked 20 Oct 2026
- A-LIGN, ISO 42001 service (Firm states, undated), checked 20 Oct 2026
- Vanta, ISO 42001 certification cost (Firm states, estimates, no page date), checked 20 Oct 2026
- Schellman, What to do about an ISO related nonconformity (Firm states, published 2022-03-24, updated 2026-03-19), checked 20 Oct 2026
It takes about two minutes.
Get quotes